Item(s) added to cart
View Cart

Top 3 Best Carbon Fibre Filament Companies in 2020

Carbon Fiber Filament

Image courtesy of Tom Sanladerer's video on our Carbonyte filament

Updated for 2019 

The availability of new, exciting 3D printing materials has increased dramatically in a few short years. Originally, you were confined to just your regular PLA and ABS filaments on any machine costing less than $30,000 or so. Now, you’re able to print with nearly any material you want, on a desktop printer for about $1000.

One of those exciting new developments is Carbon Fibre composite filaments. The properties of carbonfiber filament include incredible strength to weight ratio, rigidity, good tensile strength and resistance to corrosion and fatigue.

What is Carbon Filament?

It’s important not to get confused, or have unrealistic expectations here. Carbon fibre filament is not the same as the carbon fibre you might expect to find in high performance race cars or aircraft. The processes, materials used and the design are all completely different. Typical fibre-based composites are large, long sheets of woven fibres sealed in a tough epoxy based resin, not a re-meltable thermoplastic (like filaments are).

Frustratingly most CF (Carbon Fibre) filaments available at the moment are just PLA mixed with CF dust. Now, PLA is typically very brittle (certainly most varieties of it are) and adding another brittle material in the form of a powder essentially creates one of the most brittle printing materials you could think of. That's Carbon Fiber PLA. 

That’s the reason (and I may get slated for this) you’re not going to find Carbon Fibre PLA filament in this “best of” article. That’s because PLA does not complement carbon.

For similar reasons we're not going to cover Carbon Fibre ABS filament here either. 

A better use of your time (and money, because CF filament isn’t cheap) would be to choose a base material with excellent durability to counter Carbon’s potentially brittle (but vert hard) nature. That way, you’ll be left with prints that exude rigidity, hardness and durability. Which, let’s face it, is the golden set of properties for high performance applications.

Using materials like PETG and Nylon, or other better performing resins, with small particles (or strands) of CF inside, makes a version of the material closer to what you’d expect. The base resin used, amount of CF and size of the individual particles of carbon in the material affect a range of factors, including printability, cost and finished part strength.

Make no mistake: the right blend of resin and CF can make a superior, hard, stiff and durable material that will rival any other filament available for consumer level FDM printing today. So for those projects where nothing else will do, carbon could be your go-to filament.

You can treat this article as a mini carbon fiber filament review. Let’s take a look at the 4 highest performance 3D printer carbon fiber filament varieties currently available on the market today:



ColorFabb XT CF20 (Carbon Fibre PETG Filament) Price: Approx. £60/KG

Thought we’d kick things off with arguably the most well-known (and cheapest) CF material in this list. ColorFabb ‘XT’ is basically the same popular PETG (think PET in plastic bottles, but Glycol-modified for strength) but with a 20% fibre reinforcement.

As with all Carbon Fiber 3D filament, it’s important you use a hardened nozzle. A regular Brass nozzle will wear out in a few short hours of printing. XT CF20 is no different, so make sure you have some hardened nozzles to hand. It’s also worth bearing in mind most fibre or composite filaments are best printed with 0.5mm or larger nozzles. If the particles in the filament are not sufficiently nano-sized then blockages can occur easily on smaller nozzle sizes.

Similar to PLA, PETG filament is rather dense so naturally XT has a higher end density, coming in at 1.27 g/cm³. Not so much an issue when printing most things, but if weight is a concern you may be interested in lower density materials (like Nylon) that can be up to 20% lighter for the same volume.

ColorFabb is a known industry benchmark, promising tolerances of +/-0.05mm of their advertised 1.75mm or 2.85mm sizes. Generally, the tighter the tolerances, the cleaner your prints will look – so it’s worth watching out for. Tolerances that are too wide can even lead to blockages, so be wary of +/-0.10mm variances in cheaper filaments.

Other benefits of XT CF20, in line with PETG filaments, are low warp and good durability. It is worth taking into consideration the typical printing nuances of PETG for best results, which you can find more info on here.



MatterHackers NylonX (Carbon Fibre Nylon Filament) Price: Approx. £110/KG

Although PETG-based CF filaments are significantly better than ABS or PLA-based composites, the ultimate harmony of materials is Nylon and CF combined. NylonX is MatterHacker's take on this combination of Carbon Fiber Nylon Filament.

Nylon polymer is, we think, arguably the best material currently available to 3D print with for the majority of performance applications.

Nylon is one of those materials that just has it all. Extreme durability, great chemical and heat stability and a low friction coefficient to name a few properties. And with its great durability, it naturally makes for a perfect pairing with the otherwise fairly brittle CF.

Granted, Carbon Fiber 3D Printer filament has a rougher, matte finish, so the low friction advantage isn’t as good as non-composite Nylon, but it’s still a favourable factor over other base resin materials if this is a concern.

It’s worth noting though that all Nylon based filaments should always be dried before printing. Nylon filament is extremely hygroscopic and can absorb a lot of moisture in a short time frame. If you hear popping during printing, that’ll be too much moisture.

Again as with ColorFabb’s XT CF20 above, Nylon X diameter tolerances are a reasonable +/-0.05mm of the advertised size. This is a mid-range Nylon Carbon Fiber filament. 



Onyx (Nylon Carbon Fiber Filament) Price: Approx. £200/KG

Another Nylon based CF filament (can you see a trend here?) is this one from Onyx. These are the guys behind the impressive Markforged 2 continuous fibre 3D printer. Using a continuous fibre, the prints you can get are closer in strength to more recognized CF materials. However, this continuous approach can only currently be done on the special Markforged printer.

For comparison, their carbon continuous filament is priced at an eye-watering £2500/KG.

For everyone else, their original material ‘Onyx’ works in standard 3D printers and is simply a higher grade of Nylon and CF. It is similar to Nylon X (as above), but the quality is arguably more in keeping with what you’d expect from an ultra-high performance material.

The only down side with this Carbon Nylon filament is the price, as it the most expensive filament in this comparison.

As to which carbon filament is for you, this is determined by what you’re actually needing it for and your budget.

We’ve covered a cheaper option, mid-range and the high end of the market. We’ve not included it in this list, as we wanted it to be impartial, we’ve also created a Nylon 12 CF filament called Carbonyte which you can view here.

With consistent sized nano particle carbon fibers, using pure high-grade Nylon 12 resin and extruded to ultra tight tolerances of just 0.03mm+/-, you may well have found the high performance material you've been looking for with Carbonyte. Our manufacturing controls and customer service are second to none.


You can watch Thomas Sanladerer's video review of our Carbonyte here: 


Please let us know your thoughts for this comparison guide, and feel free to leave comments or questions below. We’ll be only too happy to help. Liked this guide? Why not grab our Free Easy Cheat Sheet to 100% Reliable 3D Printing while your here?

It could save you some time and money.

Previous Post Next Post

Love our content? Get our FREE Easy Cheat Sheet to 100% Reliable 3D Printing! - 5 Min Read

Ultimate Guide to 3D Printing
  • Save a TON of time 'tinkering'
  • Stop wasting filament (and money) on failed prints
  • Gain confidence in those longer prints
  • Advanced advice with easy explanations
  • We know you're busy - condensed in just a 5 minute read
Your subscription could not be saved. Please try again.
Your subscription has been successful.

Tell us where to send your 31 Ways To Get 100% Reliable 3D Prints Cheatsheet!

Please enter your name and email

We'll send you a link to where you can download our guide

Don't worry, we hate spam as much as you do - we will not abuse your contact details in any way.

By opting in to receive the cheatsheet you agree to receive email from us & agree to our GDPR terms and conditions.

Please enter your name and email

We'll send you a link to where you can download our guide

Get FREE helpful, detailed Cheatsheet and articles about 3D printing delivered to your inbox 1-2 times a month.

Very occasionally we'll email you about a new product, or a promotion (maximum of 5 times a year). Your email will never be shared, we take you privacy very seriously and hate spam as much as you do. You can unsubscribe at anytime. Privacy and terms at the bottom of this page.

A Comprehensive Video Course & Exclusive Support Community with Direct Access to Experts

A Comprehensive Video Course & Exclusive Support Community with Direct Access to Experts

Opt in below to be the first to know

Be the first to know once the course is available We hate spam as much as you do. Your information will never be shared and will only be used to notify you on details relating to this course.

Want RELIABLE 3D Prints?

Get our top tips to stop fails

Download Our Cheatsheet

Download our FREE Easy Cheatsheet to Achieve 100% Reliable Printing!

Ultimate Guide to 3D Printing

We've condensed our best tips & 'hacks', from years of 3D printing experience into this waffle-free guide

  • Save a TON of time 'tinkering'
  • Stop wasting filament (and money) on failed prints
  • Gain confidence in those longer prints
  • Advanced advice with easy explanations