Item(s) added to cart
View Cart

How to Use 3D Printer Cleaning Filament (& What Not to Do)

This article is going to simply explain what 3D printer cleaning filament is. We'll explain why it could be a time (and in some instances a life) saver for you.

Then we'll cover how best to use it, and what to avoid so it's as easy for you to use as it should be. 

Why you need cleaning filament:

You don’t have to have used a 3D printer for long to realise that regular maintenance is a necessary evil.

With plenty of things that can go wrong, and many moving parts, it’s no secret that the better you look after your printer, the less time you’ll spend scratching your head over it.

Or more aptly, experience the “I’m going to chuck this thing out of the window” level frustration of coming back to your machine printing in ‘thin air’, because it stopped extruding part way through your print.

In some instances it's not a blockage that annoys you the most, but an other-wise perfect print finishing with little specks of your previous colour filament embedded in it. 

The extruder and nozzle components of your printer are no exception – in fact they’re arguably the most sensitive parts to your printer.

They need the most maintenance yet they’re traditionally the hardest part to keep in top condition - often you can’t tell a blockage is lurking until it’s too late.

How not to clean your nozzle

How not to clean your nozzle

 Now there are antiquated methods to cleaning your nozzle, which are usually (if you admit it) only done after you’ve experience a blockage.

Before it’s happened though, you don’t really give a conscious thought to that blockage that’s lurking in that nozzle, waiting to happen.

And that’s where cleaning filament comes in. Use it proactively and it’s the best preventative measure, yet it’ll also help to unblock all but a fully clogged nozzle.

We’ll briefly cover the current after-its-blocked nozzle cleaning methods such as ‘Atomic method’ or ‘cold pull’ technique and the ‘insert micro drill bit the size of your nozzle’ method and then compare them to the newer, proactive method of a cleaning filament review below.

If you've currently got a fully blocked nozzle, you can read our full guide to unclogging your nozzle here. 

In this article we’re going to cover:

  • What is cleaning filament
  • Advantages/disadvantages over other methods
  • What to look for when buying it (and where to buy it)
  • How to use it

Feel free to scroll to the specific section of this guide for the information you’re looking for, although I recommend reading it all so that you get the best help for how to use 3D printer cleaning filament.

It could save you a lot of hassle and time later on.

How does cleaning filament work & what is it?

You’re likely skeptical that cleaning filament is a bit of a gimmick. Or just as likely, you’re not convinced you even need it.

Never had a blockage before? I don’t believe you It can happen to anyone at any time.

Some think cleaning filament as just made from Nylon or HDPE filament – which is the material of choice for the cold pull method. It isn’t by the way (and you don’t use the cold pull method with cleaning filament).

Or perhaps it’s just a cheap, highly abrasive material that strips everything out? And presumably erodes the inside of your nozzle over time…

Again, no. It’s actually (we can only speak for ours, of course) a non-abrasive industrial grade compound for purging hard-stuck chemical residues out of injection moulding machines.

We’ve sourced the best we could find, modified it for a larger range of operating temperatures and extruded it into 3D printer-friendly filament form. 

Why use cleaning filament over traditional methods?

The Cold Pull or Atomic Method

First on the left, towards a cleaner nozzle on the right. You can see how this can easily take 5-6 'pulls' 

The well-known ‘atomic method’ or ‘cold pull’ has long been the method of choice to clean out your nozzle. Often done after you’ve experienced a full or partial blockage, the general method goes like this:

  1. Heat up your nozzle to around 250C and insert Nylon filament as far as it will go, then cool the nozzle back down to about 30C while maintaining the pressure.
  2. Once cool, quickly pull the Nylon out. Usually takes a good hard yank (you may need one hand on your printer to prevent it being pulled off the desk).
  3. Do this procedure 3-5 times or until the end of the filament you’re pulling out is clear and has a well-defined tip (indicating a clear and residue-free nozzle).

In our opinion this process is a little bit, well, brutal. The whole process puts a lot of strain on some relatively delicate parts in your machine.

It also takes time heating and cooling your nozzle each time, and waiting around (you don’t want to leave the material hot in the nozzle for too long either; it definitely won’t help your situation).



The other option is if the cold pull method won’t work, you’ll likely need to insert a very thin drill bit or hypodermic needle up there. You’ll want to use the same size as the nozzle.

For 0.4mm nozzles, this is just about possible, but if you’re printing with 0.2mm nozzles or small – you’ll probably be best off just replacing it.

The risk here, apart from the obvious dangers of using very small, thin needles (we don’t recommend it, for the record) is that they can snap off inside the nozzle.

You’ll notice neither of these methods are really fool proof, or that user friendly. Luckily, there’s a better way that’s fairly new on the scene.

3D Nozzle cleaning filament takes far less time to clean out your nozzle. Often in as little as 30 seconds, and you don’t need to do anything out of the ordinary, except changing filament. Which you should be pretty comfortable with by now…

Disadvantages to using cleaning filament:

This wouldn’t be a fair review without telling you what you can’t use it for, and why it’s not for everyone.

  1. You can’t unblock a fully clogged nozzle with it. You need to have at least some flow rate to work. That’s why it’s always best having and using nozzle cleaner filament before you need it.

As long as some filament comes through with a small amount of force, you should be able to unclog your nozzle. And we promise we won’t stand back, arms folded saying “told you so” the whole time…

  1. It’s expensive. Well, it isn’t. But at first glance. You see, you really don’t need much. About 0.5 to 1 gram per use, maximum. Luckily you don’t need to buy a whole KG spool of it then (if you did, ours would be £360/KG).

For around £18 you’ll get 50 grams, which will get you a solid 70-100 nozzle purges. That’s just 20p per clean, in 30 seconds. Which compared to 20 minutes yanking your 3D printer around for each clean, well – it’s a no-brainer.


What to look for when buying, and where to buy cleaning filament?

Make sure you know what you’re getting. Some cleaner filaments could just be re-branded cheaper materials that don’t perform as advertised. Make sure you read the reviews, and factor in the price.

There may be cheaper ones on the market, but it’s worth weighing up – you may need more grams per clean if they’re not as effective, so it could end up being more expensive overall.

Other known brands we’re aware of are Lulzbot and eSun cleaning filament, so it may be worth doing your own testing.

Reviews are usually a pretty good indicator that it does as advertised. As for where to get it, you can find a few popular brands on Amazon or direct from us here.


How to use Cleaning Filament:

3D Printing Revolution Floss Cleaning Filament Review

This is a screenshot from 3D Printing Revolution's Youtube Floss Cleaning Filament review video


If you’ve bought some already and you’re left wondering what to do with this un-printable filament – or you’re just wanting to read up on cleaning filament instructions before you begin, here we explain what you should and shouldn’t be doing with your new one-stop 3D printer cleaning kit.

For most machines, there’s no need to cut the cleaning material, just load and unload like a regular filament.

For other machines or if you have an under extruding partial blockage, you may wish to unplug the Bowden tube to manually push the Floss filament through the nozzle.

 a) When printing with the same material:

  1. Printing with one material like PLA, all the time? How often you need to use your cleaner filament will depend on how often you print, and the quality of filament that you use. Poor quality or cooked/burned filament can leave residue in your nozzle. Even PLA can solidify in the nozzle over time, so we advise flushing it through at least every 200 - 400 printing hours.
  1. Depending on your printer design, there are a few ways to use cleaning filament. In most instances, simply unload the previous filament and load your cleaner filament as you would any other filament.
  1. Keep the printing temperature the same as your printing filament and begin to extrude the new cleaner material into thin air (don’t try to print with it!). Many printers will extrude a set amount as part of the loading process anyway. Keep extruding until you cannot see residue of the previous material, or contamination specks. Once it runs clear, simply unload and reload with your printing filament. No need to try a cold pull (although you can if you’re still not convinced it worked).


 b) When printing with different materials:

  1. Always run the cleaner filament through at the last printing temperature. So if you were using PLA, and you’re changing materials to ABS, run the cleaner through at around 200C, not 230C. Likewise if your last material was Nylon and you’re changing down to PETG, you’d run the cleaner through at around 260C. Our Floss cleaning filament has a temperature range of 200-280C+
  1. As before, run enough filament through until you’re sure you cannot see any specks or residue. Then just unload and proceed as normal with your new material, ensuring the nozzle is at the correct temperature for the new material before you load it.


And that’s it, that simple. You may need to manually feed it if your nozzle is partially blocked to get some to feed through, just to apply a little extra pressure.

Although don’t force it, if your nozzle is completely blocked unfortunately you’ll just have to use one of the previously mentioned unblocking methods.

As they say, an ounce of prevention is worth a pound of cure. If you want to read what others say about our cleaning filament Floss, you can check them out here.

No need for the sales pitch, it’s only your time, hassle and frustration you’ll be saving if you use it.

Like all our articles, I hope this was of use to you. Feel free to comment below if it helped you, or to share your experiences.

Previous Post Next Post

Love our content? Get our FREE Easy Cheat Sheet to 100% Reliable 3D Printing! - 5 Min Read

Ultimate Guide to 3D Printing
  • Save a TON of time 'tinkering'
  • Stop wasting filament (and money) on failed prints
  • Gain confidence in those longer prints
  • Advanced advice with easy explanations
  • We know you're busy - condensed in just a 5 minute read
Your subscription could not be saved. Please try again.
Your subscription has been successful.

Tell us where to send your 31 Ways To Get 100% Reliable 3D Prints Cheatsheet!

Please enter your name and email

We'll send you a link to where you can download our guide

Don't worry, we hate spam as much as you do - we will not abuse your contact details in any way.

By opting in to receive the cheatsheet you agree to receive email from us & agree to our GDPR terms and conditions.

Please enter your name and email

We'll send you a link to where you can download our guide

Get FREE helpful, detailed Cheatsheet and articles about 3D printing delivered to your inbox 1-2 times a month.

Very occasionally we'll email you about a new product, or a promotion (maximum of 5 times a year). Your email will never be shared, we take you privacy very seriously and hate spam as much as you do. You can unsubscribe at anytime. Privacy and terms at the bottom of this page.

A Comprehensive Video Course & Exclusive Support Community with Direct Access to Experts

A Comprehensive Video Course & Exclusive Support Community with Direct Access to Experts

Opt in below to be the first to know

Be the first to know once the course is available We hate spam as much as you do. Your information will never be shared and will only be used to notify you on details relating to this course.

Want RELIABLE 3D Prints?

Get our top tips to stop fails

Download Our Cheatsheet

Download our FREE Easy Cheatsheet to Achieve 100% Reliable Printing!

Ultimate Guide to 3D Printing

We've condensed our best tips & 'hacks', from years of 3D printing experience into this waffle-free guide

  • Save a TON of time 'tinkering'
  • Stop wasting filament (and money) on failed prints
  • Gain confidence in those longer prints
  • Advanced advice with easy explanations