PLA Plus+ 1.75mm 3D Printer Filament


Write a review

PLA Plus+ 1.75mm 3D Printer Filament


£4.25 GBP(incl. VAT 20%) £3.54 GBP(ex. VAT 20%)
Write a review

Subscribe to have your repeat order automatically placed in the timescale selected without having to visit the site everytime and save 5%. Cancel Anytime.


  • ‘Enhanced’ PLAs have a bad reputation, some are no better than PLA, some perform worse in some conditions. We’ve taken a different approach: our ‘regular’ PLA is regarded as the strongest pure PLA in the industry, it’s hard to improve on the best. But sometimes you need something a little more durable. Enter our specially formulated PLA Plus. Prints like PLA, but with better durability.
  • Note: While not stronger or harder than our regular PLA, our PLA Plus is designed for applications where you need that enhanced durability, or even a little flex over standard PLA. This is a very tough PLA, it will never snap or shatter* – it will just eventually slowly deform. *Not tested in -0°C conditions.
  • Like a pearlescent sheen to your prints? Our PLA Plus colours have a beautiful sheen to them, which catches the light unlike any other filament. Check out the photos in the reviews below to see what we mean.
  • As with all rigid.ink filaments, our pure resin formula contains no nasty contaminants that lurk to block your nozzle at any moment. Your rigid.ink is also extruded to industry leading tight tolerances: this ensures consistent layers, giving uniform strength through your print and nicely finished layer lines. We guarantee 100% reliable printing. Every. Single. Time.
  • Any issues with your order or printing setup? We’ve got you covered. Our friendly, efficient and knowledgeable technical support team are on hand to get you back on track.

Description

What is PLA Plus?

PLA Plus is an enhanced version of our PLA that's less brittle and more durable. 

Please note: If you're simply looking for the strongest PLA on the market, you may be better suited to our 'regular' PLA here (though there's nothing 'regular' about our PLA).

PLA Plus is for applications where good vibration absorption and a lower fracture rate is needed.

Why rigid.ink?

We became so tired of the hordes of terrible quality PLA 3D printer filaments flooding the market, we decided to release our own. You need a PLA filament you can rely on, something that won't ever jam your head and produce flawless prints, every time.

Accurately represented colours, near-perfect tolerances and excellent raw material quality was our aim. It wasn't easy, but we're confident we've produced a 3D printer filament to be proud of. In fact, we'd be surprised if you found better.

Especially for this price.

Using the most technologically advanced equipment and the finest raw materials, we produce a consistent filament with a tolerance of just 0.03mm either side of the 1.75mm diameter we promise. We know it's good, we test it thoroughly with lasers.

Don't feel like committing to a whole KG roll?

No worries, we even sell lengths of our PLA filament in multiples of just 10 meters, allowing you to try out a range of colours at a fraction of the price. The colours you see in the images are the exact colour you'll receive. We may not have the biggest selection of colours (more coming soon!) but they won't disappoint. 

Sure the quality is amazing, but what about the service?

It's fashionable to say you give great service, but ours really is second to non. Seriously, not happy with your purchase in any way? Let us know, we'll bend over backwards to help you out. So why wait, order from just 10 meters or 1KG of rigid.ink today and start printing something amazing.

We even do free UK mainland delivery on orders over 65.00 GBP. 

Works with pretty much all filament based 3D printers, our spool size is - 20cm dia, 7cm width, 5.6cm dia spool hole.

Please note a different pigment is being used for the black from February 2017 onwards.

Read more
Settings


Settings
Printing Temperature: Start at 220°C
Bed Temperature: 50°C
Bed Adhesion: Blue decorators tape, PVA Glue
Print Speed: 30-40 mm/s (higher speeds may need slightly hotter printing temp, up to 230°C)
Cooling Fans: 100% after layer 1 or 2
Ideal build chamber: None, all covers and doors removed.

Good ventilation is essential and do not leave print unattended.

Information
Sample Weight: Approx 35g
Empty Spool + Filament Weight: Approx 250g + 1KG = Approx 1.25KG
1KG Spool size: 20cm dia, 7cm width, 5.6cm dia spool hole
3KG Spool size: 29.8cm dia, 10.3cm width, 5.3cm dia spool hole

Post-Print Processing
Glues/Adhesives: Cyanoacrylate (Super-Glue), Acetone, Epoxy Resins
Polishing/Smoothing: Cannot be acetone smoothed, needs sanding and polishing
Printing: Acrylic, cellulose-based paints

Please note: settings vary printer to printer so experimenting is essential

Data Sheet Currently Unavailable

’Specialist’ Filaments; Why you’d use them and best printing tips

Help Center – PLA vs PLA Plus+

Compare All Filaments
Reviews

Customer Reviews

Based on 44 reviews
73%
(32)
14%
(6)
7%
(3)
2%
(1)
5%
(2)
J
J.E.S.
Geweldig

Makkelijk te verwerken en een prima stevig eindresultaat.

S
S.D.
Superb

Easy to print with a very fine finish. I don't really need the extra toughness at the moment but when I do I will certainly use this.

C
C.W.
Needed alternative to ABS

Got a 10 metre sample to try to print parts for a D Bot I am going to make. I have HICTOP printer modded with a E3D light Bowden set up and glass on the heated bed. I used the minimum recommended temperatures and 3Dlac on the bed. At .25 layer height the prints are spot on. Surface finish and flat surfaces smooth and accurate. No stringing or other defects and no failures on the 4 parts I printed.
I am really impressed so have ordered a 1kg spool to continue with the rest of the parts.
I have a spool of the standard PLA but this will probably stay in its sealed pack until I get the D Bot bits printed. Will be happy to review that when I get it on the printer.
I would recommend Rigid ink PLA Plus if you need an alternative to ABS and like me don't have the correct conditions (ventilation etc.) to print ABS.

P
P.
Strong and almost no stringing at all

For things that you won't be looking at and you need to be strong it's great, prints well with minimum stringing but the finish is very rough, this could be me being unable to dial it in correctly as I'm new to 3d printing but that's my newbies first impressions.

Hi Phil, Thanks for your positive comment, I'm glad you like rigid.ink. If you're experiencing any issues with your printing, I can have a look at your settings and find out where is the problem. Feel free to send me an email to customerdelight@rigid.ink with your settings and photos of your print and me or our technical specialists can determine the issue. All the best Monica
S
S.C.
You Make My Ink Rigid

Brilliant guys, loving the PLA Plus just started printing Lithophanes with it and the results are excellent.
Just some feedback from the ASA on my last order. I'm making lamp shades for the garden and they are looking fine.
(pictures attached) Printed on Cr-10 and a Hacked 3D Systems CubePro.

Everything ive had from you Guys & Gals has been epic.

Photos
Upload your prints
Delivery

We work hard to find the best shipping rates for our customers so that you never pay more than you should!

Shipping can be altered at the checkout after filling in your delivery details.

A shipping calculator is available on the cart page to determine actual shipping charges based on what is in your cart.

 

Standard UK Shipping - £1.99 - £5.99  

 

 

The charge will depend on what is ordered but will never be more than £5.99. Our standard shipping method is Royal Mail 1st Class or DPD and can take 1-3 working days.

Please note this may not be a tracked service and we are unable to open a case with Royal Mail until 10 working days after sending.

 

Free UK Shipping 

 

 

 

All UK orders over £65 are eligible for free shipping. This will be automatically calculated at the checkout.

Please note we do not guarantee which courier this will be sent with and estimate 1-3 working days for delivery.

 

UK Express Next Working Day - £8.99

 

 

This is a standard charge for all orders where Express Next Working Day is selected at the checkout. Orders must be placed by 2:30pm (GMT) to be dispatched for next working day delivery. Tracking details will be emailed and text to you and you will be given a 1 hour time slot on the day of delivery. If an order is made on a Friday before 2:30pm (GMT) it will arrive on Monday.

Please note the courier may come under interlink or DPD.

 

UK Express Saturday Shipping - £12.99  

 

 

This is a standard charge for all orders where Express Saturday Shipping is selected at the checkout. Orders must be placed by 2:30pm (GMT) Friday to be dispatched for Saturday delivery. Tracking details will be emailed and text to you and you will be given a 1 hour time slot on the day of delivery.

Please note the courier may come under interlink or DPD.

 

International Shipping  

 

 

We ship worldwide however the rates do vary depending on the order and destination. You can get an accurate delivery charge by using the shipping rates calculator at the cart page. Delivery times vary depending on destination, local postal services and customs. We do estimate 5-7 working days for most orders.

Please note we do not guarantee a tracked service for international delivery and various couriers may be used.

Please contact for a quote for the following countries: Afghanistan, Belarus, Congo, The Democratic Republic Of The, Lebanon, Liberia, Myanmar, Niger, Palestinian Territory, Occupied, Saint Martin, South Sudan, Sudan, Syria, Turkmenistan, Yemen, Zimbabwe, Aland Islands, Bouvet Island, British Indian Ocean Territory, Burundi, Central African Republic, Christmas Island, Cocos (Keeling) Islands, Eritrea, French Southern Territories, Heard Island And Mcdonald Islands, Holy See (Vatican City State), Iran, Islamic Republic Of, Iraq, Libyan Arab Jamahiriya, Mali, Norfolk Island, Pitcairn, Saint Helena, Saint Pierre And Miquelon, Somalia, South Georgia And The South Sandwich Islands, Svalbard And Jan Mayen, Tokelau, United States Minor Outlying Islands, Wallis And Futuna, Western Sahara

 

Any Questions? Please get in touch (call, email or chat) and we'll be happy to help.

Read more

We're also the highest rated filament supplier on

highest rated on Amazon.co.uk

Sorry, you've already got a free sample for this filament in your cart. You're welcome to order other samples of rigid.ink though!

OK, got it