
Here at rigid.ink, we understand how important filament testing is.
This is why we have created our filament multipack containing our composite materials.
It is only available in 1.75mm.
One sample of each material included is: Nylon 12 Plus and Carbonyte.
Please note these materials require a hardened metal nozzle due to abrasiveness.
You'll save nearly £2 compared to buying the samples individually. Easier and cheaper - what could be better!?
When testing different filaments we would suggest starting with the lower temperature materials and working your way up. This should prevent blockages due to deposits left by materials printed at higher temperatures.
It is also important to clean your nozzle regularly (often done between using different materials), we would suggest using FLOSS™ cleaning filament.
These materials are only available in their natural colours.
Click here to compare filaments.
We do not hold Food Safety Certificates.Some of the raw materials used to produce our filaments are food safe accordingly to European regulations, but our filament in it's final form is not officially approved. Neither is the 3D printing process and all the components of 3D printers.
Still not sure if Rigid.ink is for you? Contact us or check out our FAQs page.
Printing Temperature: 255°C
Bed Temperature: 100-110°C
Print Speed: 30-40 mm/s (higher speeds may need slightly hotter printing temp, up to 265°C)
Cooling Fans: Off at all times
Ideal build chamber: Closed. Ideally heated to 90-95°C inside chamber.
Carbonyte Guide Settings
Printing Temperature: 255°C
Bed Temperature: 100-110°C
Print Speed: 30-40 mm/s (higher speeds may need slightly hotter printing temp, up to 270°C)
Cooling Fans: Off at all times
Ideal build chamber: Closed
Good ventilation is essential and do not leave print unattended.
Help Center - Nylon 12 Plus vs Carbonyte Summary
3D Printing Nylon Filament - Step-by-step Settings & Problems Solved
Top 3 Best Carbon Fibre Filament Companies
Compare All Filaments
For specific 3D printing help, please complete our 3D Printing Help Form.
We do not hold Food Safety Certificates. Some of the raw materials used to produce our filaments are food safe accordingly to European regulations, but our filament in it's final form is not officially approved. Neither is the 3D printing process and all the components of 3D printers.


Don't leave money on the table...
Look at all the ways you can pick up points and get your rewards below.
* - Our VIP customers get a rewarding 5% cashback.
How do I get points?
You'll need an account though. Don't have one? Get 250 bonus points if you sign up today!




What can I use my points for?


*How do I become VIP?
Join the VIP club...
This means you'll receive a total of 5% cashback on your rigid.ink purchases, as an extra thank you to our most loyal customers.