
Test 30 PLA 1.75mm printing filament samples in one helpful pack and save over £11 compared to buying the individual PLA filament samples.
That's the same as over 3 free samples!
Receive a 10m sample of each colour for testing.
Note: Some colours are now out of stock so you may receive multiple samples in one colour
Still not sure if Rigid.ink is for you? Contact us or check out our FAQs page.

Guide Settings
Printing Temperature: Start at 180°C
Bed Temperature: Off-45°C
Bed Adhesion: Blue decorators tape or Kapton Tape. Use glue stick for extra adhesion if needed.
Print Speed: 30-40 mm/s (higher speeds may need slightly hotter printing temp, up to 205°C)
Cooling Fans: 100% from layer two onward
Ideal build chamber: None, remove all covers and doors.
Good ventilation is essential and do not leave print unattended.
Information
Density: 1.24g/cc
Glass Transition Temp: 55-60°C
Tensile strength: 8,383 psi (57.8MPa)
Sample Weight: Approx 35g
Empty Spool + Filament Weight: Approx 250g + 1KG = Approx 1.25KG
1KG Spool size: 20cm dia, 7cm width, 5.6cm dia spool hole
3KG Spool size: 29.8cm dia, 10.3cm width, 5.3cm dia spool hole
Click here to find out how many meters of filament is on your spool
Post-Print Processing
Annealing: 70°C for around 30mins
Glues/ adhesives: Cyanoacrylate (Super-Glue), Acetone, Epoxy Resins
Polishing/Smoothing: Cannot be acetone smoothed, needs sanding and polishing - Click here to read how to article
Painting: Acrylic, cellulose or oil paints
Please note: settings vary printer to printer so experimenting is essential
PLA 3D Printing Filament – Everything you need to know
How to Smooth PLA to a Mirror Finish
Help Center – PLA vs ABS Summary
Help Center – PLA vs PLA Plus+ Summary
Compare All Filaments
For specific 3D printing help, please complete our 3D Printing Help Form.
We do not hold Food Safety Certificates. Some of the raw materials used to produce our filaments are food safe accordingly to European regulations, but our filament in it's final form is not officially approved. Neither is the 3D printing process and all the components of 3D printers.
Download Datasheet


Don't leave money on the table...
Look at all the ways you can pick up points and get your rewards below.
* - Our VIP customers get a rewarding 5% cashback.
How do I get points?
You'll need an account though. Don't have one? Get 250 bonus points if you sign up today!




What can I use my points for?


*How do I become VIP?
Join the VIP club...
This means you'll receive a total of 5% cashback on your rigid.ink purchases, as an extra thank you to our most loyal customers.