Item(s) added to cart
View Cart

PLA Plus+ 2.85mm (fits 3.0mm) 3D Printer Filament


Write a review

PLA Plus+ 2.85mm (fits 3.0mm) 3D Printer Filament


Write a review
£36.95 GBP (incl. VAT 20%)
£30.79 GBP (ex. VAT 20%) Regular price
Not all sizes available in this colour, contact us for more info.

Subscribe to have your repeat order automatically placed in the timescale selected without having to visit the site everytime and save 5%. Cancel Anytime.

In Stock Get it fast - Order before 2.30pm GMT (UK) & get same working day dispatch. Next Day UK Mainland delivery available.

You may want to order soon - only 9 left in stock.

Only currently available, entire order will be held until all items are available.
Order over the phone: Call 01937 589 052

  • ‘Enhanced’ PLAs have a bad reputation, some are no better than PLA, some perform worse in some conditions. We’ve taken a different approach: our ‘regular’ PLA is regarded as the strongest pure PLA in the industry, it’s hard to improve on the best. But sometimes you need something a little more durable. Enter our specially formulated PLA Plus. Prints like PLA, but with better durability.
  • Note: While not stronger or harder than our regular PLA, our PLA Plus is designed for applications where you need that enhanced durability, or even a little flex over standard PLA. This is a very tough PLA, it will never snap or shatter* – it will just eventually slowly deform. *Not tested in -0°C conditions.
  • Like a pearlescent sheen to your prints? Our PLA Plus colours have a beautiful sheen to them, which catches the light unlike any other filament. Check out the photos in the reviews below to see what we mean.
  • As with all rigid.ink filaments, our pure resin formula contains no nasty contaminants that lurk to block your nozzle at any moment. Your rigid.ink is also extruded to industry leading tight tolerances: this ensures consistent layers, giving uniform strength through your print and nicely finished layer lines. We guarantee 100% reliable printing. Every. Single. Time.
  • Any issues with your order or printing setup? We’ve got you covered. Our friendly, efficient and knowledgeable technical support team are on hand to get you back on track.
PLA Plus+ 2.85mm (fits 3.0mm) 3D Printer Filament

Description

PLA Plus 2.85 Filament

Please note: Previously available colours were discontinued 24.08.18 and are no longer available. If you wish to order in bulk please contact customerdelight@rigid.ink to discuss options.

What is PLA Plus?

PLA Plus is the new and improved PLA! It is easy to print with and biodegradable like PLA but more durable than ABS. 

*NOTE: Some printers do prefer lower temperatures for rigid.ink PLA Plus+ 200-210°C, bed temp 40°C. If your test print is looking a little too runny and the layers aren't cooling enough try lowering your temperatures.

Why rigid.ink?

We became so tired of the hordes of terrible quality PLA 3D printer filaments flooding the market, we decided to release our own. You need a PLA filament you can rely on, something that won't ever jam your head and produce flawless prints, every time.

Accurately represented colours, near-perfect tolerances and excellent raw material quality was our aim. It wasn't easy, but we're confident we've produced a 3D printer filament to be proud of. In fact, we'd be surprised if you found better.

Especially for this price.

Using the most technologically advanced equipment and the finest raw materials, we produce a consistent filament with a tolerance of just 0.03mm either side of the 1.75mm diameter we promise. We know it's good, we test it thoroughly with lasers.

Don't feel like committing to a whole KG roll?

No worries, we even sell lengths of our PLA filament in multiples of just 10 meters, allowing you to try out a range of colours at a fraction of the price. The colours you see in the images are the exact colour you'll receive. We may not have the biggest selection of colours (more coming soon!) but they won't disappoint. 

Sure the quality is amazing, but what about the service?

It's fashionable to say you give great service, but ours really is second to non. Seriously, not happy with your purchase in any way? Let us know, we'll bend over backwards to help you out. So why wait, order from just 10 meters or 1KG of rigid.ink today and start printing something amazing.

We even do free UK mainland delivery on orders over 60.00 GBP. 

Works with pretty much all filament based 3D printers, our spool size is - 20cm dia, 7cm width, 5.6cm dia spool hole.

Please note a different pigment is being used for the black from February 2017 onwards.

We do not hold Food Safety Certificates. Some of the raw materials used to produce our filaments are food safe accordingly to European regulations, but our filament in it's final form is not officially approved. Neither is the 3D printing process and all the components of 3D printers.

Settings


Guide Settings
Printing Temperature: 220°C*
Bed Temperature: 50°C*
Bed Adhesion: Blue decorators tape, PVA Glue
Print Speed: 30-40 mm/s
Cooling Fans: 100% after layer 1 or 2
Ideal build chamber: None, all covers and doors removed.

*NOTE: Some printers do prefer lower temperatures for rigid.ink PLA Plus+ 200-210°C, bed temp 40°C.
If your test print is looking a little too runny and the layers aren't cooling enough try lowering your temperatures.

Good ventilation is essential and do not leave print unattended.

Information
Sample Weight: Approx 35g
Empty Spool + Filament Weight: Approx 250g + 1KG = Approx 1.25KG
1KG Spool size: 20cm dia, 7cm width, 5.6cm dia spool hole
3KG Spool size: 29.8cm dia, 10.3cm width, 5.3cm dia spool hole

Post-Print Processing
Glues/Adhesives: Cyanoacrylate (Super-Glue), Acetone, Epoxy Resins
Polishing/Smoothing: Cannot be acetone smoothed, needs sanding and polishing
Printing: Acrylic, cellulose-based paints

Please note: settings vary printer to printer so experimenting is essential

’Specialist’ Filaments; Why you’d use them and best printing tips

Help Center – PLA vs PLA Plus+

Compare All Filaments

Data Sheet Currently Unavailable

For specific 3D printing help, please complete our 3D Printing Help Form.

We do not hold Food Safety Certificates. Some of the raw materials used to produce our filaments are food safe accordingly to European regulations, but our filament in it's final form is not officially approved. Neither is the 3D printing process and all the components of 3D printers.

Reviews

Customer Reviews

Based on 12 reviews
83%
(10)
0%
(0)
8%
(1)
8%
(1)
0%
(0)
M
M.P.
Good product

Exelente product at a very good compatible price

J
J.G.
PLA Plus+ 2.85mm White Filament

Great filament to use as usual - now if I could only get it to stick to the build plate!

Hi Joe, Thanks for the positive review, but I'm sorry to hear that you're having some issues to get it to stick! You can send me an email to customerdelight@rigid.ink with your settings, so I can have a look at it and find out what's going on if you want? All the best Monica
F
F.
PetG

First class delivery arrived next day, PETG filament is great no problems printing and good quality prints. Still to try PLA+ but have used similar from others and doesn't seem to cause any problems so not expecting any issues. Main reason for trying new filament is because of many failed ABS Prints.

C
C.
Brilliant stuff!

I recently thought I'd give PLA Plus a try as I was having a hard time with ABS. I think this filament is fantastic. I print on an Ultimaker 2+ at 190C and bed temp of 60C and I have no problems at all with adhesion to the bed without any glue or tape etc. The prints come out smooth and sharp and adhesion to the plate is so good I have to wait until it's completely cool and then run the plate under the cold tap to get the prints off.
Can't recommend this filament enough. Give it a try, I don't think you'll be disappointed.

J
J.
So far so good

I've only used the white PLA Plus so far. The main job was a 13 hours print. that came out with no problems.
I found it a little easier to clean up than other filament I have tried. A slightly smoother feel after the initial sanding.

Make sure you read the box. It uses a slightly higher temperature than traditional PLA.

Only time will tell if it is stronger.

Photos
Upload your prints
Delivery

Shipping & Delivery

We work hard to find the best shipping rates for our customers so that you never pay more than you should!

Shipping can be altered at the checkout after filling in your delivery details.

A shipping calculator is available on the cart page to determine actual shipping charges based on what is in your cart.

 

Standard UK Shipping - £1.99 - £5.99  

 

 

The charge will depend on what is ordered but will never be more than £5.99. Our standard shipping method is Royal Mail 1st Class or DPD and can take 1-3 working days.

Please note this may not be a tracked service and we are unable to open a case with Royal Mail until 10 working days after sending.

 

Free UK Shipping 

 

 

 

All UK orders over £65 are eligible for free shipping. This will be automatically calculated at the checkout.

Please note we do not guarantee which courier this will be sent with and estimate 1-3 working days for delivery.

 

UK Express Next Working Day - £8.99

 

 

This is a standard charge for all orders where Express Next Working Day is selected at the checkout. Orders must be placed by 2:30pm (GMT) to be dispatched for next working day delivery. Tracking details will be emailed and text to you and you will be given a 1 hour time slot on the day of delivery. If an order is made on a Friday before 2:30pm (GMT) it will arrive on Monday.

Please note the courier may come under interlink or DPD.

 

UK Express Saturday Shipping - £12.99  

 

 

This is a standard charge for all orders where Express Saturday Shipping is selected at the checkout. Orders must be placed by 2:30pm (GMT) Friday to be dispatched for Saturday delivery. Tracking details will be emailed and text to you and you will be given a 1 hour time slot on the day of delivery.

Please note the courier may come under interlink or DPD.

 

International Shipping  

 

 

We ship worldwide however the rates do vary depending on the order and destination. You can get an accurate delivery charge by using the shipping rates calculator at the cart page. Delivery times vary depending on destination, local postal services and customs. We do estimate 5-7 working days for most orders.

We now offer FREE shipping on orders over €200 for the following areas:

Scilly Isles
Channel Islands
Isle of Man
Northern Ireland
Republic of Ireland
Belgium
France
Germany
Luxembourg
Netherlands
Scottish Highlands
Isle of Wight
Austria
Denmark
Czech Republic
Italy
Solvakia
Spain

Please note we do not guarantee a tracked service for international delivery and various couriers may be used.

Please contact for a quote for the following countries: Afghanistan, Belarus, Congo, The Democratic Republic Of The, Lebanon, Liberia, Myanmar, Niger, Palestinian Territory, Occupied, Saint Martin, South Sudan, Sudan, Syria, Turkmenistan, Yemen, Zimbabwe, Aland Islands, Bouvet Island, British Indian Ocean Territory, Burundi, Central African Republic, Christmas Island, Cocos (Keeling) Islands, Eritrea, French Southern Territories, Heard Island And Mcdonald Islands, Holy See (Vatican City State), Iran, Islamic Republic Of, Iraq, Libyan Arab Jamahiriya, Mali, Norfolk Island, Pitcairn, Saint Helena, Saint Pierre And Miquelon, Somalia, South Georgia And The South Sandwich Islands, Svalbard And Jan Mayen, Tokelau, United States Minor Outlying Islands, Wallis And Futuna, Western Sahara

 

Any Questions? Please get in touch (call, email or chat) and we'll be happy to help.

Rewards

What are rigid.ink Rewards?

rigid.ink Rewards is our points based reward scheme. For every order you place you will receive points. You can also earn points for other actions. Click here to read more. Points can be redeemed as rewards (discount codes) for your future orders.

Please note: Only one discount code can be used per order.

How do I get reward points?

You get points for every order made. 

Every £1 spent will give you 5 points. 

You must have a rigid.ink customer account to redeem your points. 

You will also get 250 welcome reward points when you create an account.

You can also earn points for other actions but these must be completed through the rigid.ink Reward pop up 'Earn' tab, to see the full list click here.

What do the reward points mean?

Points mean rewards, issued as discount codes to be used for future orders. 
They can be applied at the payment page during the checkout (only one discount code per order).

250 reward points = £1.25 off discount
250 reward points = £2 off discount (orders £10+)
500 reward points = £2.50 off discount
1000 reward points = £5 off discount
1000 reward points = FREE UK Shipping
2000 reward points = £10 off discount
4000 reward points = £20 off discount
4000 reward points = FREE International Shipping

How can I see my reward points?

Creating or logging into your account will allow you to see your point balance and history.
You can see them on your account profile or at the rewards tab at the bottom of the page after logging in.

How do I redeem my reward points?

Click on the rewards tab (bottom left of the screen) or your points in your account profile, the rigid.ink rewards pop up will appear. 

From there you can select the ‘Rewards’ tab to redeem your unlocked rewards and get your discount code. 

Once redeemed you will also receive an email confirming your reward redemption. 

Reward are unlocked when you reach the number of points needed to redeem the reward

Please note: Only one discount code can be used per order.

All points are based on the incl. VAT (20%) price.

Sorry, you've already got a free sample for this filament in your cart. You're welcome to order other samples of rigid.ink though!

OK, got it

You have selected our subscribe to save 5% option.

Please select how often you would like to automatically re-order to add to cart and save 5%.

Alternatively, if it is a one-time purchase please select one-time purchase to add to cart.

So that we can tailor the guides we send you, please tell us what level of 3D printing you're at:

OK

Please enter your name and email

We'll send you a link to where you can download our guide

Get FREE helpful, detailed guides and articles about 3D printing delivered to your inbox 1-2 times a month.

Very occasionally we'll email you about a new product, or a promotion (maximum of 5 times a year). Your email will never be shared, we take you privacy very seriously and hate spam as much as you do. You can unsubscribe at anytime. Privacy and terms at the bottom of this page.